Home   ::   Products   ::   Resources   ::   Careers   ::   News & Events   ::   Gallery   ::   Contact Us   ::   About Us   ::   Weblogin   ::   Site Map

Toroidal Winding Heads                       Products Index  Request for Quote/Information

Toroidal Winding Heads - Combination Slider/Round Belt Winding Heads

4" QA Head




Maximum coil OD 1.500" (38.0 mm)
Minimum coil OD 0.375" (10.0 mm)
Minimum coil ID 0.150" (3.8 mm)
Maximum coil HT 1.000" (25.4 mm)
Wire size #18-#42 AWG (1.0-0.06 mm)
6" QA Head


Maximum coil OD 2.500" (63.5 mm)
Minimum coil OD 0.625" (15.8 mm)
Minimum coil ID 0.375" (10.0 mm)
Maximum coil HT 1.500" (38.0 mm)
Wire size #18-#42 AWG (1.0-0.06 mm)



7" QA Head




Maximum coil OD 3.000" (76.0 mm)
Minimum coil OD 1.000" (25.4 mm)
Minimum coil ID 0.500" (12.7 mm)
Maximum coil HT 2.000" (50.8 mm)
Wire size #22-#40 AWG (0.6-0.08 mm)

4" Standard Head
 4 Standard


Maximum coil OD 1.000" (25.4 mm)
Minimum coil OD 0.375" (10.0 mm)
Minimum coil ID 0.150" (3.8 mm)
Maximum coil HT 0.500" 12.7 mm)
Wire size #22-#42 AWG (0.60-0.06 mm)


      These Combination Slider/Round Belt Winding Heads are all compatible with the SMC-1 JV100BE JV250 SMC-2 Machines.

Flat Belt Winding Heads

6"Flat Belt Head





Maximum coil OD: 2.500" (63.5 mm)
Minimum coil OD: 0.625" (15.8 mm)
Minimum coil ID: 0.375" (10.0 mm)
Maximum coil HT: 1.500" (38.0 mm)
Wire size: #16-#26 awg (1.40 - 0.4 mm)
 4"Flat Belt Head






Maximum coil OD: 1.500" (38.0 mm)
Minimum coil OD: 0.375" (10.0 mm)
Minimum coil ID: 0.250" (6.0 mm)
Maximum coil HT: 1.000" (25,4 mm)
Wire size: #16-#30 awg (1.4 - 0.25 mm)
 2"Flat Belt Head





Maximum coil OD: 0.375" (10.0mm)
Minimum coil OD: 0.187" (4.7mm)
Minimum coil ID: 0.075" (1.91mm)
Maximum coil HT: 0.156" (3.90mm)
Wire size: #26-#40awg (0.40 - 0.08mm)



These Flat Belt Winding Heads are all compatible on the SMC-1 JV100BE JV250 SMC-2 Machines.

9" High Speed Winding Head

9" High Speed Head (Belt Winding)




Maximum coil OD 5.000" (127.0mm)
Minimum coil OD 1.500" (38.0mm)
Minimum coil ID 0.500" (12.7mm)
Maximum coil HT 3.000" (76.2mm)
Wire size #16-#24 awg (1.4-0.5mm)
9" High Speed Head (Slider Winding)




Maximum coil OD 5.000" (127.0mm)
Minimum coil OD 1.500" (38.0mm)
Minimum coil ID 0.625" (15.8mm)
Maximum coil HT 3.000" (76.2mm)
Wire size #22-#38 awg (0.64-0.1mm)

The 9" High Speed Winding Head is one head with the ability to change from slider to belt winding.

The 9" High Speed Winding Head is compatible with the SMC-2 JV200 Machines
7" Gear and Tape Head

7"Gear Head






Maximum coil OD: 4.000" (101.6mm)
Minimum coil OD: 1.000" (25.4mm)
Minimum coil ID: 0.500" (12.7mm)
Maximum coil HT: 2.000" (50.8mm)
Wire size: #16-#34 awg (1.40 - 0.16mm)
7"Tape Head






Maximum coil OD: 4.000" (101.6mm)
Minimum coil OD: 0.750" (19.0mm)
Minimum coil ID: 0.625" (16.0mm)
Maximum coil HT: 2.000" (50.8mm)
Minimum Tape Width: 1/4" (6mm)
Maximum Tape Width: 3/8" (10mm)




    7" Tape Head Features
  • Interchangeable magazines with removable sector to accommodate tape widths of 1/4"(6mm) 5/16"(8mm) and 3/8"(10mm)
  • No need to change magazine drive pulleys when changing from one size magazine to another
  • Counter controls measure of tape supply to magazine and number of wraps on core
  • Automatic tap cut-off from spool supply
  • Dereeler handles up to 12" diameter tape spools
  • Core rotation speed control allows tape overlap on core to be adjusted while taping
  • Footswitch controlled
  • Will tape all non-adhesive materials (mylar, glass, copper shielding,etc.)

Gear Winding Heads

9" Gear Winding Head




Maximum coil OD 10.000" (254.0mm)
Minimum coil OD 3.000" (76.1mm)
Minimum coil ID 2.000" (50.8mm)
Maximum coil HT 3.500" (88.9mm)
Wire Size #12-#24 awg (2.1-0.5mm)
12" Gear Winding Head




Maximum coil OD 15.000" (381.0mm)
Minimum coil OD 3.000" (76.1mm)
Minimum coil ID 1.625" (41.2mm)
Maximum coil HT 6.000" (152.4mm)
Wire Size #8-#20 awg (3.25-0.81mm)
16" Gear Winding Head




Maximum coil OD 17.000" (431.3mm)
Minimum coil OD 3.000" (76.1mm)
Minimum coil ID 1.750" (44.5mm)
Maximum coil HT 7.000" (177.6mm)
Wire Size #7-#20 awg (3.66 - 0.81mm)


The 9" and 12" Gear Heads are compatible with the SMC-2 JV200 JV300 SMC-3 Machines.
The 16" Gear Head is compatible with only the JV300 SMC-3 Machines.

Jovil's 9"-14" Taping Heads

These taping and shielding heads are used for applying a variety of non-adhesive tapes such as mylar, polyester, paper, varnished silk, fiberglass, cloth, copper shielding, etc. on toroidal coil applications. Gear driven, interchangeable magazines for various widths of tape. Automatic tape cut-off from spool supply. Electronic counter measures supply of tape to magazine and wraps of tape onto core. Separate speed controls for loading wrapping. Fully adjustable tape overlap on core.



9" Taping Head




Maximum coil OD: 10.000" (254.0mm)
Minimum coil OD: 3.000" (76.2mm)
Minimum coil ID: 2.000" (50.8mm)
Maximum coil HT: 3.500" (88.9mm)
Minimum tape width: 5/16"(8mm)
Maximum tape width: 1"(25mm)
9"SI Taping Head




Maximum coil OD: 10.000" (254.0mm)
Minimum coil OD: 2.000" (50.8mm)
Minimum coil ID: 1.000" (25.4mm)
Maximum coil HT: 3.000" (76.2mm)
Minimum tape width: 5/16"(8mm)
Maximum tape width: 1"(25mm)
14" Taping Head




Maximum coil OD: 10.0" (254.0 mm)
Minimum coil OD: 1.5" (38.0 mm)
Minimum coil ID: 0.650" (16.50 mm)
Maximum coil HT: 3.0" (76.2 mm)
Minimum tape width: 1/4"(6mm)
Maximum tape width: 1/2"(12mm)

All of these Tape Heads are compatible with the SMC-2 JV200 JV300 SMC-3 Machines.

Site Map|Best Viewed with IE 5.0 or Netscape 6.0 or above. © Infantron Singapore R.O.C. No.:199609296C All rights reserved.|Site Terms|Privacy Policy