Specification / Capabilities
Maximum wire size #8 awg (3.25mm)
Minimum wire size #38 awg (0.1mm)
Maximum coil OD 10.000" (254.0mm)
Minimum coil OD 1.500" (38.0mm)
Minimum coil ID 0.500" (12.7mm)
Maximum coil HT 3.500" (88.9mm)
Winding speeds Variable to 1000 tpm
Wire spacing Automatic variable
Segment winding Automatic reversal of core
Progressive winging Automatic with microprocessor
Deceleration control Automatic with microprocessor
Acceleration control Automatic with microprocessor
Motor 1/2 HP - 1725 RPM-DC
Power requirement 110-120V, 50-60 cycles (220V optional)
Crated dimensions 37" x 37" x 42" (94 x 94 107cm)
Crated weight 300 lbs (136 kg)
Optional Microprocessor Controller for JV200
The model JV200 can be supplied with an optional microprocessor controller.
This option will give the machine the following capabilities:
- Multi-presets for pulling taps
- Automatic progressive winding
- Storage of programs in memory
- Acceleration and deceleration
|
Principal and Optional Features
- Quick change heads for winding and taping (5 minute change-over)
- Choice of two interchangeable core rotators
- Separate control console unit, housing complete machine controls for both winding and taping - readily adjustable for operator convenience
- Variable speed control with footswitch stop and start - bypass option
- Choice of standard dual preset electronic counter or 99 level microprocessor count control for multi-preset capability
- Vernier dial core rotation speed control (pitch) - may be changed with machine running
- Core rotators with individual adjustment of two drive rollers by means of worm and gear assembly - quick core removal and insertion by means of lever
- Core rotation direction reversed automatically or by push button switches on control console
- Automatic core index via push button
- Wide selection of magazines available for all heads
|
Request for Quote/Information