Features FW210
sturdy cast aluminium machine construction
service-friendlyness through modular construction
2 separate servo motors for the drive and pitch control unit
programmable CNC control
memory for 180 operations under 99 product numbers
large wire range up to 2.0 mm
quick-change-over to various bobbin types (only tool and wire change), i.e. time saving up to 70% compared with conventional machines
free programmable fixed points of traverse
5 speed ranges up to 16000 rpm
ball-screw spindle for accurate wire feed
Easy Operation and Programming by:
symbolic programming
large clear alphanumeric LCD display
teach-in method for the reversal points
correction of parameters during winding
winding types: spreading, spreading to a programmed reversal point, layer stop
speed regulation by various foot control units
network ability by serial interface 20 mA TTY
Technical Data
| wire range |
0.01 - 2.0 mm |
| pitch range |
0 - 60 mm |
Speed range 1
Speed range 2
Speed range
3
Speed range 4
Speed range 5 |
0 - 16000 rpm
0 - 8000 rpm
0 - 4000 rpm
0 - 2000 rpm
0 - 1000
rpm |
Max torque 1
Max torque 2
Max torque 3
Max
torque 4
Max torque 5 |
50 Ncm
100 Ncm
200 Ncm
400 Ncm
800 Ncm |
| winding width |
285 mm |
| center height |
140 mm |
| max. winding diameter |
200 mm |
| max. clamping width |
400 mm |
| voltage |
230 V 50/60 Hz single-phase |
| power consumption |
1.0 kVA |
| space requirements |
800 × 340 mm |
| weight |
84 kg |
| floppy disk drive |
optional |
| display |
alphanumerical (4 lines) |
| memory |
999 operations, 999 products |
|